Build Thread: RSI Twin Turbo Street Kit (Gen. 2)

[Blown408]

Couple people asked me to post this here, it has been up on VA since the beginning.

Here are some of the things that are on and will be going on the car soon -- All install work is being done at ARD Motorsports in Northern Georgia:

RSI Twin Turbo Street Kit
67 Upgraded Turbos
Custom 3 to 3.5" Side Exhaust
AEM EMS
AEM Serial Datastream Gauges
Raptor Shift Light
Corbeau Racing Seats

When I received some of the kit:

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

In the shop:

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Blown408]

Re: Build Thread: RSI Twin Turbo Streek Kit (Gen. 2)

First start today!

http://www.youtube.com/watch?v=J4el819Hhwg&feature=player_embedded

 

[opnwide]

I've been following your post over at VA. Good luck on those dyno numbers...

 

[Blown408]

Thanks! I will def. get some videos and post the numbers for everything

Looking for 700 low boost to run on the street and then they can go wild on high boost..... maybe 850 or close to it? We will see.

 

[anton28]

I've been following this build on the VA. Even though I never post on there i always log in to read. Great build!!! I've been talking to Will about a fully forged engine build with gen 4 ported heads' gen 4 intake and dual throttle bodies for my 06 coupe. TT will have to follow later. I wish my car had the forged bottom end like your gen 2 some could go straigh TT. We're looking to get 650 rwhp so I'll behappy for a bit

 

[Blown408]

That is awesome man, your car will be sick with that! Hopefully you start that thing soon so I can watch your build thread

 

[anton28]

That is awesome man, your car will be sick with that! Hopefully you start that thing soon so I can watch your build thread

Thanks Bro! Will have to post a thread on the VA as well then.

BTW no frame cutting with this TT kit, right?

 

[speedracervr4]

You can see the holes that were cut for the oil lines.

 

[anton28]

You can see the holes that were cut for the oil lines.

They could have as easily been routed over the frame. I'm talking about notching the frame to make the turbos fit. The gen 3 street kits do not require any frame mods. Per RSI.

 

[speedracervr4]

They could have as easily been routed over the frame. .

I don't think so, but I'm not going to argue about it.

 

[Vital Velocity]

Who built your exhaust

 

[Blown408]

Sorry guys don't know the gen 3 logistics but gen 2 needs to be done that way, all good though.

ARD in north Georgia is doing the exhaust while its in there for me. Once it's all done ill post up some more pics of it.

 

[Vital Velocity]

Did they fabricate it? Can you pm me what it ran you? Thinking of doing the switch

 

[Blown408]

Yep they are fabricating it, should be done today. I can tell you outright the price I dont mind... I dont have the exact bill yet but he estimated $175 per side with piping and labor on exhaust and side skirts. The mufflers were $50 shipped on Summit.... so safely you would be in it around 4-450? Not bad in my opinion.

 

[uvbnbit]

Looks like JD's Silver '99 RT/10 in there too?

 

[Blown408]

Not sure who's it is but heard it was destined for almost 2000hp?

 

[Vital Velocity]

Yep they are fabricating it, should be done today. I can tell you outright the price I dont mind... I dont have the exact bill yet but he estimated $175 per side with piping and labor on exhaust and side skirts. The mufflers were $50 shipped on Summit.... so safely you would be in it around 4-450? Not bad in my opinion.

Man. I think I want lol. Definetly post pictures when installed

 

[Blown408]

I will, I will pm you my cell number if you have any additional questions as well. But yea for the price it was a no brainer! Shoot I have Tiffs 3 inch Heffner exhaust I never used that I can now sell and break even.

 

[hyph]

Look at this baller.... congrats buddy!

 

[uvbnbit]

Not sure who's it is but heard it was destined for almost 2000hp?

Probably so. I think JD has been flirtin' with 2000hp for a while.

 

[Blown408]

New video with the side exit exhaust! Not the best quality but these guys are awesome for taking/sending:

http://www.youtube.com/watch?v=TrpI-hEigUY&list=HL1365553839&feature=mh_lolz

 

[kllymartin]

Congrats on going Racing Solutions TT.

 

[Joseph Dell]

Probably so. I think JD has been flirtin' with 2000hp for a while.

Yeah... I keep breaking cranks. Billet crank is on order and so that and a Turbo 400 will go back in it whenever the crank is ready.

ARD is good people. Top notch shop.

 

[anton28]

Yeah... I keep breaking cranks. Billet crank is on order and so that and a Turbo 400 will go back in it whenever the crank is ready.

ARD is good people. Top notch shop.

What's up JD. Long time no talk man!

 

[Blown408]

Yeah... I keep breaking cranks. Billet crank is on order and so that and a Turbo 400 will go back in it whenever the crank is ready.

ARD is good people. Top notch shop.

I stole your hood....

 

[DrumrBoy]

Steal the motor, its even better than the hood! ;-)

 

[Blown408]

Car killed it on the dyno! We made 862rwhp/862rwtq at 13.5 peak:

http://www.youtube.com/watch?v=qU9abplcIJI

 

[StoleIt]

Are the engine internals still stock?

Great numbers!

 

[XtraTQ]

That license plate is great. Congrats on the build/numbers!

 

[Blown408]

Are the engine internals still stock?

Great numbers!

Yes sir all stock!

That license plate is great. Congrats on the build/numbers!

lol, yea I love the plate too. Thanks!