Austin
Enthusiast
Nice work as usual.
VIPER BAZ UK
Enthusiast
They look AWSOME!!!!! Cheers Tim ..... More beer?????
His work is 1st class !!!!!
His work is 1st class !!!!!
doctorbob
Enthusiast
I am in....Christmas is coming. PM me prices. Bob
VIPER BAZ UK
Enthusiast
Those cabinet/drawer pulls are an awesome idea! I'm fairly confident that the wife won't let me put them in the kitchen...maybe my office.
COPYRIGHT!!!!!!!!!! LOL
Speedy G
Viper Owner
orange fangs for me!!!! PLEASE!!!!!!
mike & juli
Enthusiast
HOW did I miss THIS one??? My gosh, Tim, good thing you HAVE scraps to work with, what EVER would your GF do if you didn't have that??? 
WOWSA...I truly am speechless...the quality of your work is awesome.
I see lots of people here who would buy from you--see whatcha started???
~juli-again-who-is-speechless (but it didn't last again)
WOWSA...I truly am speechless...the quality of your work is awesome.
I see lots of people here who would buy from you--see whatcha started???
~juli-again-who-is-speechless (but it didn't last again
)xlrashn
Viper Owner
Prices?????
Mopar Boy
Enthusiast
Good lord batman! I dont know how I have missed this thread!
VERY nice job on the yellow items. OK nice on the other colors.
Ditto: It this stuff become available, let me know!
VERY nice job on the yellow items. OK nice on the other colors.
Ditto: It this stuff become available, let me know!
OP
OP
Gotvenom 08
Guest
Well you gave me an idea and I went with it! Used the cabinet pulls(that were made previous) as hooks.It is only has 2 hooks as I didn't want the wording covered when there are items hanging from them.After all we can't cover up the club name.
And it is for viper jackets and coats only!
You must be registered for see images attach
You must be registered for see images attach
Machined slots for a head of a wood screw(16 inch on center) to be fastened.This will work nicely and will be very secure when hung on the wood screws.
You must be registered for see images attach
Now for my other project that I finished.This pic shows what was made out of the scrap from the key chain holders.
You must be registered for see images attach
Here they are all painted and polished.
You must be registered for see images attach
Great giveaway items at car shows or just for people (kids) looking at the viper when out and about.
LifeIsGood
Enthusiast
Okay, so you've got key chain holder and jacket/coat rack taken care of...now it's time for the viper hat rack 
.
.
Janni
Enthusiast
ok - so perhaps I am a real dork.
How does one purchase this cool stuff?
How does one purchase this cool stuff?
MTGTS
Enthusiast
Looks great, I'll take a sneaky pete key holder in black
CarDude
Enthusiast
OK...where are you selling this stuff? I want some stuff
Y2K10 SRT#39
Enthusiast
Timbo-
Is there somebody we need to inundate with e-mails to allow you to sell stuff here?
I don't knowe what you do for a day job, but if you can sell some of this stuff....you can quit!
Yellow SRT-10 key chain holder!!!!! Let me know the pricing when you can!
PBR
Is there somebody we need to inundate with e-mails to allow you to sell stuff here?
I don't knowe what you do for a day job, but if you can sell some of this stuff....you can quit!
Yellow SRT-10 key chain holder!!!!! Let me know the pricing when you can!
PBR
OP
OP
Gotvenom 08
Guest
QUOTE=Spook120;2778059]Do you give tutorials? Great work. Still wondering if this stuff is for sale and purchase process. You are one talented dude my man! *****[/QUOTE]
Suppose if you can tutorial 30 plus yrs of machining experience in a condensed form then perhaps we can come to a conclusion.Thank you for the comps.........Pending( as that word raises eye brows)
Well working on more coasters(at the moment) as it is the "Holiday Season" and we all hate those pesky drink rings on our table tops.
Whats a dork?
Thanks and we will see what Santa has to say about you!As I inquire to him directly.(I have his hot line number)
Santa is asking if you have been good?I will check his response and see if you are getting a Christmas present or coal.
Suppose if you can tutorial 30 plus yrs of machining experience in a condensed form then perhaps we can come to a conclusion.Thank you for the comps.........Pending( as that word raises eye brows)
Okay, so you've got key chain holder and jacket/coat rack taken care of...now it's time for the viper hat rack
Well working on more coasters(at the moment) as it is the "Holiday Season" and we all hate those pesky drink rings on our table tops.
Whats a dork?
Thanks and we will see what Santa has to say about you!As I inquire to him directly.(I have his hot line number)
Santa is asking if you have been good?I will check his response and see if you are getting a Christmas present or coal.
Timbo-
Is there somebody we need to inundate with e-mails to allow you to sell stuff here?
I don't knowe what you do for a day job, but if you can sell some of this stuff....you can quit!
Email every one!!!!!!!!!!!!
Yellow SRT-10 key chain holder!!!!! Let me know the pricing when you can!
PBR
jdeft1
Enthusiast
No fair!!! The masses want viper stuff!!
Get your torches everyone! Let's viper caravan/rally on over to Timbo's place to thumb wrestle the creator until he gives up his stash of goodies!
(for fair compensation for his hard work and a fat pile of cash, of course...)
Get your torches everyone! Let's viper caravan/rally on over to Timbo's place to thumb wrestle the creator until he gives up his stash of goodies!
(for fair compensation for his hard work and a fat pile of cash, of course...
)
Ricketts
Enthusiast
WOW, as always super impressive! You're quite talented.
white out
Enthusiast
very cool. nice work.
Nick
Nick
SnakeEye
Viper Owner
Great work and the orders are coming in... pricing list?
VIPER BAZ UK
Enthusiast
THERE HERE!!!!!! And the quality is AWSOME!!!!!!!!
Pics to follow.........
Thanks
Speaking of projects.Here is my latest(latest) item.A member (Baz UK) asked me if it was possible to make some cabinet door handle pulls.He is going to have a custom garage for sure.Only one like it in Britain.
So that idea didn't sound to difficult.So head first I went into this project.
The head dia is approx 1 3/8 the body is 5/8 and it is drilled and tapped for a 10/32 screw.Over all length is about 1 1/16.
This pic is of the first prototype ones made.The small Pete was just that,it was to small.So I made that logo bigger,,,as the middle one shows.But is was to far down on the face of the knob. Moved the logo up just a bit as the far left one shown is the final product.I was tinkering with putting the word viper on it,as shown in pic.But it looked like to much clutter on the face of it.I think just the logo and wording is perfect.After all every one knows that the logo is that of a viper, right?
These were made on a turning center(Mazak) then the secondary operation was made in a machining center.Made a soft jaw in vise to accept the 5/8 body.Took an end mill and faced off the top for a nice smooth finish.Then etched the wording on it.After that a prepolish was needed,and then ready for either painting or anodizing.I chose to paint a few to see how they would look.
Here is a pic to show size relative to a quarter.
Pics to follow.........
Thanks
Speaking of projects.Here is my latest(latest) item.A member (Baz UK) asked me if it was possible to make some cabinet door handle pulls.He is going to have a custom garage for sure.Only one like it in Britain.
So that idea didn't sound to difficult.So head first I went into this project.
The head dia is approx 1 3/8 the body is 5/8 and it is drilled and tapped for a 10/32 screw.Over all length is about 1 1/16.
This pic is of the first prototype ones made.The small Pete was just that,it was to small.So I made that logo bigger,,,as the middle one shows.But is was to far down on the face of the knob. Moved the logo up just a bit as the far left one shown is the final product.I was tinkering with putting the word viper on it,as shown in pic.But it looked like to much clutter on the face of it.I think just the logo and wording is perfect.After all every one knows that the logo is that of a viper, right?
You must be registered for see images attach
These were made on a turning center(Mazak) then the secondary operation was made in a machining center.Made a soft jaw in vise to accept the 5/8 body.Took an end mill and faced off the top for a nice smooth finish.Then etched the wording on it.After that a prepolish was needed,and then ready for either painting or anodizing.I chose to paint a few to see how they would look.
You must be registered for see images attach
Here is a pic to show size relative to a quarter.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
[/quote]Similar threads
