dash removal question

JST2CRZY

Enthusiast
Joined
Jul 8, 2007
Posts
139
Reaction score
0
Location
Deland, FL
On my 96 gts I have all the screws removed and everything is unplugged. I just cannot figure out how to work the dash around the steering column.
There is an "L" shaped portion that wraps around the lower left hand side of the column that seeems to be the part that is preventing it from coming out.
Read every thead I could find pertaining to this and found nothing definitive. What am I missing?
Thanks
 

KNG SNKE

Enthusiast
Joined
Oct 14, 2007
Posts
3,943
Reaction score
1
Location
Portsmouth, Rhode Island
Aim the steering wheel down. You may have to remove the plastic shroud on the steering column to make enough clearance. Show a photo of the L portion, I am drawing a blank on that one.
 
OP
OP
J

JST2CRZY

Enthusiast
Joined
Jul 8, 2007
Posts
139
Reaction score
0
Location
Deland, FL
I tried tilting the wheel all the way down - no luck. The yellow around it is a rag. Also, if I remove the three screws that hold the bottom of the shroud will the top half come off too?
I need to buy the tool to remove the screws so have not tried it yet.



You must be registered for see images
 

KNG SNKE

Enthusiast
Joined
Oct 14, 2007
Posts
3,943
Reaction score
1
Location
Portsmouth, Rhode Island
Yes the top half will come off. You can remove the dash without removing that shroud but you have to be confident. I have removed 3 now, little flexing but no breaking.
 

Latest posts

Members online

Forum statistics

Threads
153,644
Posts
1,685,209
Members
18,220
Latest member
ROIII
Top