fuel surround rubber on GTS

[FLX109]

Has anyone had to replace the rubber around the fuel door on the GTS body? I am wondering the best way to replace it as it looks like it is pulling away a little bit and wondering if it is a easy fix, is it glued or just set in?
thanks

 

[Smokin' 2]

I'm starting to notice this issue as well. Sorry I have nothing to help but look forward to hearing from those that have addressed it.

 

[blackandblue01]

https://www.viperpartsofamerica.com...e-viper-gts-acr-rubber-fuel-surround-05245665


Is this the piece, If so no big deal. It just pulls off with a little tug. Use some 3m molding/gasket sealer and push the new one in.
If yours still looks ok and isn't cracked just do this to yours. When I repainted my car I ran into this.

 

[DrumrBoy]

$154, wow....expensive part. Try to save yours!

 

[KNG SNKE]

check text messages.

 

[96GTS]

I'm doing mine right now. Be sure to prep the surface by washing all the dirt and gobble-dee-goop off with warm soapy water and rinse well. I'm going to use an old tooth brush to get in the hard to reach areas and give it plenty of time to dry. My gasket has shrunk a bit, so I'm going to set it out in the sun for a while to make it a little more pliable.