Gen III to Gen IV Engine Build
- Thread starter Nader
- Start date
Guys we have made some progress.
Complete Balenger Exhaust received. We went will Belangers since I was looking to maintain power under the curve instead of maximizing peak power. Also the belangers should maintain low end torque and offset the affects of the big cam.
Belangers installed on passenger side....
Both headers and collectors fitted. Wiring harness in place and partially fitted, cooling system reinstalled.
Harmonic balancer and crankshaft pulley installed. Stock computer installed.
Moving along. Next is thermostat and housing, valve covers and ported lower, custom fuel rails, and upper intake install... Exciting stuff!
Complete Balenger Exhaust received. We went will Belangers since I was looking to maintain power under the curve instead of maximizing peak power. Also the belangers should maintain low end torque and offset the affects of the big cam.
Belangers installed on passenger side....
Both headers and collectors fitted. Wiring harness in place and partially fitted, cooling system reinstalled.
Harmonic balancer and crankshaft pulley installed. Stock computer installed.
Moving along. Next is thermostat and housing, valve covers and ported lower, custom fuel rails, and upper intake install... Exciting stuff!
Thanks Jon. It is coming along. It is killing me not to have it. Cant wait for the first cruise with you guys.
Guys parts still for sale...
1. Quality plug wires
2. Stock GenIII Computer with DC performance tune
3. K&N Setup
4. New SCT tool with Roe Performance tune
PM me if interested.
Guys parts still for sale...
1. Quality plug wires
2. Stock GenIII Computer with DC performance tune
3. K&N Setup
4. New SCT tool with Roe Performance tune
PM me if interested.
Tom- Added a couple more pictures FYI.
Also dont forget, you still have a set of stock G3 Valve Covers, Coils, Heads, Camshaft & Rockers available as well.
Also dont forget, you still have a set of stock G3 Valve Covers, Coils, Heads, Camshaft & Rockers available as well.
Last edited:
Some new pics...
Ported lower intake which will require some additional machining for idle air controller and will also be powder coated pearl black. It is a work of art....
Polished Upper intake and thermostat housing. I also had the alternator front cover polished.
Also worth noting is Dan will be fabricating a custom mechanical dual throttle body application for this project. Cant wait to see it...
Ported lower intake which will require some additional machining for idle air controller and will also be powder coated pearl black. It is a work of art....
Polished Upper intake and thermostat housing. I also had the alternator front cover polished.
Also worth noting is Dan will be fabricating a custom mechanical dual throttle body application for this project. Cant wait to see it...
01sapphirebob
Enthusiast
Some new pics...
Ported lower intake which will require some additional machining for idle air controller and will also be powder coated pearl black. It is a work of art....
Polished Upper intake and thermostat housing. I also had the alternator front cover polished. I
Also worth noting is Dan will be fabricating a custom mechanical dual throttle body application for this project. Cant wait to see it...
I would be interested to see that throttle body as well.
Throttle bodies as in two! Going to one of a kind.
I would be interested to see that throttle body as well.
01sapphirebob
Enthusiast
Simms
Enthusiast
Cool project! Is this the swap Arrow was going to put out?
There was talk about Arrow offering something similar but I guess it never made it to market. They were going to use that manifold found on the Challenger drag car and boy is it ugly. This is a one off build that Dan and I dreamed up.
I considered the move to an 08 plus but the finances didn't make sense. also I didn't want to start all over and really wasn't interested in the throttle by wire and cam in cam technology. those are some impressive numbers.
Simms
Enthusiast
Cool...good stuff. Keep the updates coming
Richie7
Viper Owner
Yea Tom I agree, why go to a gen4 with all the cosmetic and performance mods, motons, rollbar, already on your car. You will have more low end torque and no throttle lag vs a gen4, it will be a beast!
Okay some more progress...
Viper Specialties' oil pickup conversion kit from GenIV to GenIII...
Belanger full exhaust bolted on. I must say they are pretty.
FInally for good measure and some bling, ARP bolts for everything. I know some will ask why? Because I am all about the details!
Dan I have to admit I am truly impressed so far and I havent even seen the work in person. I CAN F___ING WAIT!!!!
More more...
Viper Specialties' oil pickup conversion kit from GenIV to GenIII...
Belanger full exhaust bolted on. I must say they are pretty.
FInally for good measure and some bling, ARP bolts for everything. I know some will ask why? Because I am all about the details!
Dan I have to admit I am truly impressed so far and I havent even seen the work in person. I CAN F___ING WAIT!!!!
More more...
We haven't even gotten to the **** yet guys! LOL
Just an update otherwise for Tom: Rails are done and at Polishing, Machine shop finished manifold lower today for IAC provisions, and it is over at Powder Coating now. I have a couple tricks up my sleeve with regard to the ignition system design... I think you will like
starting on that tomorrow.
Just an update otherwise for Tom: Rails are done and at Polishing, Machine shop finished manifold lower today for IAC provisions, and it is over at Powder Coating now. I have a couple tricks up my sleeve with regard to the ignition system design... I think you will like
starting on that tomorrow.Black Moon
Enthusiast
You are going to have to store that car down South so you can enjoy it this winter.
Ok some more progress. Heads assembled, valve covers installed, coil packs installed and Coil covers installed.... Notice all the pretty stainless ARP hardware - ahhhhhhh.
Mark J. Thanks again for the carbon fiber coil covers. Love them.
Next up Dan is working on completing the custom ignition system, fuels rails are getting polished then anodized and lower intake is getting powder coated Pearl Black.
Mark J. Thanks again for the carbon fiber coil covers. Love them.
Next up Dan is working on completing the custom ignition system, fuels rails are getting polished then anodized and lower intake is getting powder coated Pearl Black.
Hey Tom- Just an FYI if you didn't notice, you missed about 3 pictures in between your last two posts [valvetrain and such]
This thing just looks better by the day. I personally think this color scheme SCREAMS... no wonder I use the same one
This thing just looks better by the day. I personally think this color scheme SCREAMS... no wonder I use the same one
01sapphirebob
Enthusiast
Ok some more progress. Heads assembled, valve covers installed, coil packs installed and Coil covers installed.... Notice all the pretty stainless ARP hardware - ahhhhhhh.
Mark J. Thanks again for the carbon fiber coil covers. Love them.
Next up Dan is working on completing the custom ignition system, fuels rails are getting polished then anodized and lower intake is getting powder coated Pearl Black.
Love those Carbon Fiber coil covers. Kinda thinking about getting them for my '08. If you wound not mind, could you P.M. me the cost and where you got them from.
witz323
Viper Owner
This is pure bliss for us Gen3 owners who already have a lot of $$ into our ride. I would love to have this done.
VIPER BAZ UK
Enthusiast
GREAT THREAD!!!!!!!!!
Nothing wrong with being picky with your build.......
Nothing wrong with being picky with your build.......
Absolutely. I overlook nothing... that is what defines what I do.
Similar threads
