Gen IV rear bumper "slot": sagging plastic?

[rw99]

Has anyone experienced sagging in the boxed regions of the pic below?

You must be registered for see images attach

On my '09 ACR, that upper border of plastic is dipping down and sagging a bit. Reaching around that upper edge, I can't feel any kind of filler or support material... shouldn't there be something in there to provide form?

Anyone else seen this? Is there any sort of fix... perhaps a support bracket (Mopar, aftermarket)?


Thanks,

Rich

 

[mjorgensen Woodhouse]

They make a Mopar filler kit that fits in these holes and mimics the lower diffuser fins, it is black but can be painted if you wish.

 

[SRT09]

They make a Mopar filler kit that fits in these holes and mimics the lower diffuser fins, it is black but can be painted if you wish.

You have a pic of this Mark?

 

[mjorgensen Woodhouse]

You must be registered for see images attach

You must be registered for see images attach

Retail pricing is $252 and they are still availible through Dodge.

 

[dester243]

If that's your green viper, the left (driver's side tire) is on backwards....

 

[FrgMstr]

The previous owner put these on my car. Have never had issue with these.

You must be registered for see images

These however will not "line up" with the multiple diffusers on your car. Not sure if these would look "right" or not.

$219 at VPA.

 

[PeterMJ]

You must be registered for see images attach

You must be registered for see images attach

Retail pricing is $252 and they are still availible through Dodge.

The right piece does not fit too well, unless my eyes fail me, there is a big gap on top of that piece...

 

[GTS-R 001]

I have a bunch of those in stock,

but they are only made for converts ,

there is no Coupe version out right now

 

[PeterMJ]

Then you should make some, seems like a great opportunity right here. IMO, there should be a version with the mesh instead of bars not to worry about lining them up with rakes on the diffuser. CF inserts with black mesh would look very cool.

I have a bunch of those in stock,

but they are only made for converts ,

there is no Coupe version out right now

 

[Coloviper]

Just get a longer piece of strong aluminum bar and put on underside of ground effects with double sided 3M tape, behind the ground effects hidden. It creates a bridge and pulls up the sag. Saleen owners have been using this trick for years.

 

[rw99]

Awesome info, thanks so much guys. Steve, if you had 'em in carbon fiber I'd buy 'em!

Rich

 

[rw99]

So, are we all on the same page? There's a Mopar part but it will not fit the coupe?

 

[HyperViper]

That just looks like 2 warped pieces, the original body panels and the diffuser stuck together

The right piece does not fit too well, unless my eyes fail me, there is a big gap on top of that piece...

 

[rw99]

I have a bunch of those in stock,

but they are only made for converts ,

there is no Coupe version out right now

Steve, is it possible to modify (cut down) the convert piece to fit a coupe? Or are the convert slots LARGER than the coupe's?


Thanks,

Rich

 

[GTS-R 001]

Steve, is it possible to modify (cut down) the convert piece to fit a coupe? Or are the convert slots LARGER than the coupe's?


Thanks,

Rich

Rich,

I have both types of bumpers here, I will see what needs to be done