Help with sensor/switches on 1992

[nautoncall]

I need help identifying which sensors/switches these are and what's the part number to replace. I have a terrible oil leak from the end of this switch. I guess it's either the oil pressure sensor or oil pressure switch. It has one single yellow wire coming out of a rubber plug on the end. I can push the rubber plug back in but when I start the car the oil pressure pushes it out and the oil drips excessively. Thanks for the help. I have a video if anyone needs it.

 

[Old School]

Looks like your oil pressure sensor. Chrysler part number 56026779 is disco'ed. But aftermarket is available:

Advance Auto Parts - Down for Maintenance

 

[Goggles Pizano]

Single wire will be the switch NOT the sensor. And it is 3/8 npt thread.

I can't remember off hand the location in the picture which is which.

 

[nautoncall]

It’s the single wire!!

 

[Old School]

These appear to be single wire

1992 DODGE VIPER 8.0L V10 Oil Pressure Sender / Switch | Shop Now at RockAuto

Electrical-Switch & Relay Parts and More for Your 1992 DODGE VIPER at Reliably Low Prices. Fast Online Catalog. DIY-Easy. Your Choice of Quality. Full Manufacturer Warranty.

www.rockauto.com

 

[nautoncall]

Thanks everyone. Actually the single wire is the small thread. The 3/8 is 3 prong.

 

[99RT10GTS]

I have a new one if needed. Message me