How To Change Spark Plug Wires on GEN II

[Toronto_ACR]

I would really appreciate somebody detailing to me what has to be done to replace the spark plug wires on a 2002 ACR. What is the easiest and best way to do it. Any phots would be appreciated. i dont have a member shiop to go to the how to section.

Please Help

 

[Toronto_ACR]

Anybody know hw to change the wires on a GEN II

 

[Leslie]

pm sent I have some detailed installation instructions that may help from a VCA member

 

[AJT]

One at a time. Makes it easy

 

[dave6666]

Pull plug wires, remove plugs, install new plugs, reinstall wires.

Damn I'm good...

 

[HHI VIPER]

pm sent I have some detailed installation instructions that may help from a VCA member

Leslie...If you would be so kind, please send that info to me too! Thanks!

 

[Steve-Indy]

Leslie MAY be referring to this 2004 thread:

http://forums.viperclub.org/rt-10-g...park-plug-change-any-secrets.html#post2022439

 

[V10SpeedLuvr]

Leslie...If you would be so kind, please send that info to me too! Thanks!

Get the boat ready, fill it with beer, call me and we'll do your plugs one weekend

 

[2001 GTS]

Take off the cowl at the base of the windshield and the intake for the AC, then R&R each wire one at a time. Pretty simple job after you do it once.

 

[AJT]

Make sure you push them onto to plug hard, usually you will feel a "click" when it is all the way on

 

[Chuck 98 RT/10]

You might as well replace the plugs at the same time.

Remove windshield wipers
Remove windshield cowl.
Remove heater box.
Replace the plug wire and its spark plug one at a time. I use an air hose and blow out the area around the plug before removing it.

 

[plumcrazy]

plugs and AB's wires, then follow directions stated above