License Plate Frame

[VenomViper]

Has anyone figured out where to buy a License plate frame for the SRT? I bought one and it doesnt fit....it's almost like the space is flush against the edges of the plate...

any ideas would be appreciated...

Thanks!

 

[Nader]

MGW.

http://www.mgwltd.com/viper_license_plate_frame_srt.shtml

 

[TedK]

Simple works best for me. I bought a dozen of those cheap plastic frames for $1 each from Pep Boys online. I use rubber plumbing washers to space the plate out from the car a little and mount it all with black hex bolts. Looks clean.(not the car, its dirty)

 

[Kai SRT10]

MGW.

http://www.mgwltd.com/viper_license_plate_frame_srt.shtml

I have the MGW black anodized frame, and like it a lot.

You must be registered for see images attach

 

[06 VIPER]

MGW has a crome one very nice.

 

[Nader]

I have the chrome. As with their other products, very impressive.

 

[W. SKAF]

I would not use a license frame if i was you, i would just put the plate without a frame but make sure to put a rubber washer on every hole all 4 corners on the back of the license plate to avoid any scraches, if you use a frame you will eventually get scraches

 

[Nader]

The MGW frame is at least 3/8 thick and bolts to the trunk lide in the four corners. No way it could even move let alone scratch the car.

 

[VenomViper]

since you always need a plate...last thing I am worried about is scratches behind it...

what did annoy me is to realize that the boot scratches the car because brilliant dodge uses HARD plastic that is rough on the bottom to touch the car....the boot shifts just a little when driving and opening/closing trunk...sure enough 4 tiny scratches at each corner.....you wonder where the common sense goes sometimes

 

[Nader]

What boot? the convertible cover?

 

[Wayne Finch]

MGW.

http://www.mgwltd.com/viper_license_plate_frame_srt.shtml

I have the MGW black anodized frame, and like it a lot.

You must be registered for see images attach

What is wired on to the bottom of the frame?

 

[Snk Btn]

The plates from MGW look great

 

[Snk Btn]

How do you put pictures in your posts?

 

[Kai SRT10]

MGW.

http://www.mgwltd.com/viper_license_plate_frame_srt.shtml

I have the MGW black anodized frame, and like it a lot.

You must be registered for see images attach

What is wired on to the bottom of the frame?

****** SRX laser jammer.

 

[Sam 01 RT10]

I've got a chrome MGW plate frame with the locking screw things, minus the tool for removal. $50 shipped if anyone wants it.

$75 if Venom wants it.

 

[Dawg2Snake]

I've got a chrome MGW plate frame with the locking screw things, minus the tool for removal. $50 shipped if anyone wants it.

$75 if Venom wants it.

I will take it. But how do I get it on & off if I don't have the tool for those weird screws??

 

[YellowViperSRT10]

I dunno, that MGW looks way to cheap and just not clean enough for the Viper. I much prefer a sold black or chrome frame with covers for the screws.

 

[Timmer]

Here's the MGW chrome one...

You must be registered for see images attach

 

[DSR207]

"How do you put pictures in your posts? Snk Btn "

Click here

BTW, MGW

 

[PDCjonny]

I dunno, that MGW looks way to cheap and just not clean enough for the Viper. I much prefer a sold black or chrome frame with covers for the screws.

The last thing any MGW product would be is cheaply made, they are solid billet aluminum and beautiful. Best products on the market in their Viper stuff.

 

[YellowViperSRT10]

I dunno, that MGW looks way to cheap and just not clean enough for the Viper. I much prefer a sold black or chrome frame with covers for the screws.

The last thing any MGW product would be is cheaply made, they are solid billet aluminum and beautiful. Best products on the market in their Viper stuff.

No doubt about that, they may be bulletproof. But they look like they are homemade and un finished.

 

[zorroespanol]

KAI, how do you like that jammer? have you tested it?? I need one PRONTO but the ones I've seen out there are HUGE and unsightly...

 

[Nader]

Homemade and unfinished? You have never seen one in person. That couldnt be further from the truth.

 

[YellowViperSRT10]

Homemade and unfinished? You have never seen one in person. That couldnt be further from the truth.

Indeed i have. Seem them many times actually. Few cars at DLM and some cars at Viper meets. It seems most folks have them since there are not really any other Viper Licence plate frames. I wish they would make a nice frame like Mercedes or BMW sell that look very clean with nice covers for all the screws.

 

[Sellshomesdrivesviper]

MGW frames, I have one as well, none better.

 

[Nader]

Who needs screw covers when you can purchase nice looking stainless steel fasteners from MGW that require a special screw driver tip to remove the plate.

The frame must be miled from a black of metal. It is extrmely high quality and the finish is amazing. You have to see it in person to appreciate.

 

[Peter Nielsen]

Who needs screw covers when you can purchase nice looking stainless steel fasteners from MGW that require a special screw driver tip to remove the plate.

$15 for 4 fasteners that don't even come in black or chrome...

They really should come standard with the frame and have a finish that matches.

FWIW, for those that need a security bit: Do a search for "security bit set" on eBay. You can find 100pcs sets for $7.99 that contains all the bits you ever need.

Peter

 

[Sam 01 RT10]

Jim-Your frame is on its way.

 

[SRTRICKY]

go frameless it looks best

 

[KenricGTS]

That yellow black stripe srt coup looks awesome!! Please post pics.