Are coil overs worth it being almost 10x the price of lowering springs???
If all you care about is the look, lowering springs are certainly worth a try. Those that switch over to the more expensive options usually do so because they either couldn't get the look they wanted, didn't like how it rode, or didn't like how it handled.
All Vipers are factory equipped with coilovers
Of course I'm looking to lower the car but also looking to improve my ride compared to the Eibach springs in my last Viper.
Of course I'm looking to lower the car but also looking to improve my ride compared to the Eibach springs in my last Viper.
My gts rode like **** with eibachs. I have eibachs and lowering caps on my 06coupe and the ride is actually not bad at all. I did however just
pick up a set of Penske coilovers so I'm looking torwards the major improvement in ride and handling.
Easy if you are just a poser and looking for a cheap way to lower the car without much concern over ride and compromising factory setup, eibachs and spring caps all the way. All other reasons do it right.
Part of the problem with installing stiffer lower springs in conjunction with OEM shocks(dampers) is that the shocks will not be strong enough to absorb(dampen) the energy of the spring compressing & rebounding resulting in a ride that could be described as jarring, bouncy, or boat-like, due to the fact that the spring is oscillating out of controll.
Like this:
You must be registered for see images attach
In the case of a stiff underdampened spring the fealing would me more jarring to bouncy and the case of a softer spring would be more bouncy to boat-like.
Without shocks controlling your springs you would hit a dip in the road and the car would bounce up & down & up & down & up & down and so on until the energy eventually dissipates. The shock's job is to control the energy of the spring so that it just allows your suspension to go up & down as necessary.
Installing stiffer shorter springs on a used vehicle who's shocks are wore out to some degree (less compressing & rebounding dampening abilities than stock) magnifies the problem.
Luckily in the case of the Gen2 Viper we have stock adjustable shocks, so if you do install stiffer springs then it is wise to increase the rebound dampening to maintain ride quality&performance. I'm pretty sure the Gen3's do not have adjustable shocks, so for a budget lowering solution your better off replacing the caps only and leaving the springs alone.(gen3 guys correct me if i'm wrong)
In summery:
The stiffer the spring, The more energy it has, that needs to be controlled by a stronger damper.
So with all that considered, what is the best option price wise for someone who wants coilovers on a recreational summer cruising car? It just doesn't make sense to spend 5k on coil overs for me just to lower my car a little. But I don't want to deal with the poor ride quality of lowering springs. And isn't there a heavy duty shock out there for the Viper to accomodate lowering springs properly??
Vic, the moton & penski setups are likely what you are looking at for 5K. These are great options for a performance oriented track setup.
In the midrange you have a couple options as well:
About 3300 for a set of KW Variant 2's
And about 1500 for a set of vipairs latest setup which you can get info on from the thread titled "New Coilovers Hitting the Streets" in the Gen1/2 section.
Can't wait to see the reviews! Thanks