mirror loose

[tim bob]

my drivers side mirror is getting loose do i need to take door panels apart to tighten 94 rt

 

[Brake Dust]

On my 96 GTS I folded the top back and the bolts are right there in the base.

 

[Tom F&L GoR]

Yes, rotate the mirror 90 degrees from normal (they do move in case you brush by a pedestrian) and look into the recess.

 

[-FROG-]

Alot of people don't know this... but you can also put your **** in there.

 

[tim bob]

thanks i will try this weekend that sounds a lot easier than ripping my door panel apart.

 

[RapidTransit]

I was going to ask this also, but thought I should get a service manual first. Thanks, I,m off to tighten it up now!

 

[RapidTransit]

OK, those two bolts were a little loose. But the mirror is wobbling at the pivot,not the base...do I need to get a new mirror assembly?

 

[Brake Dust]

OK, those two bolts were a little loose. But the mirror is wobbling at the pivot,not the base...do I need to get a new mirror assembly?

Remove those two bolts and remove the base, flip it over and tighten the nut it the center. If I recall correctly.

 

[tim bob]

the whole mirror assembly turns do i need to lift up on it or anything it feels pretty tight???

 

[Tom F&L GoR]

More details, please, on what is turning and what is tight.

From the parts manual, which is in the illustrated guide section:

 

[RapidTransit]

Remove those two bolts and remove the base, flip it over and tighten the nut it the center. If I recall correctly.

Worked just as you said except there are three bolts on the backside. Thanks!