Parts needed

[DynoDaddy]

I am in need of a Power steering mounting bracket and a window switch for a Gen 2. The passenger side will no longer roll up or down, and I have to push the button really hard to get the drivers side up or down. I think the contacts are really dirty... Anyone taken the switch apart and cleaned it? Where ist he best place to get a new switch.

Any of you tuners or SC guys have a power steering bracket laying around??

 

[1TONY1]

You need to get a billet bracket from Doug Levin for the ps. No more problems after that...it's a nice piece.

 

[99 R/T 10]

Tony is correct! Call DLM for a really nice bracket. Also, you are correct, the window switch contacts get corroded over time. You can take them apart to clean them. I used a pencil eraser.

 

[Paul Scharf]

I should have both parts used if you need them, call me 800 338 4002, Paul

 

[MaxedGTS]

make sure you get a billet power steering bracket or it will break again

 

[DynoDaddy]

I called Paul and he took care of me. Hopefully the parts will be on the door step when I get home!

I did not break the PS bracket BTW. Thanks for the suggestions!

 

[luc]

DynoDaddy:

When/if you take the switch apart,you will see that there is a LED in it for night illumination.
But...DC being cheap,since the switch came from another car with green illumination and the viper is orange,they decided not to use it.

On my GTS,I changed both LED to orange and have both switchs illuminated for night driving.

Luc. 00GTS

 

[DynoDaddy]

sweet thanks for the heads up!!