Size and Spacing of Stripes

[SUN RA KAT]

Yes, I used the Search feature, but it didn't find anything.

I was asked anout the size (width) and spacing of Viper stripes by someone who wants to get the same done on his SRT-4.

Can anyone help me so I can help him?

Thanks in advance.

BTW - I thought they were 8" wide with a 4" space between the two stripes.

 

[VPRTKMIKE]

Yes they are 8 inch wide with 4 inch space between.

 

[SUN RA KAT]

Thanks, Mike!

 

[Warfang]

Yes they are 8 inch wide with 4 inch space between.

OMG... whatever you do... take it to a pro. I just put stripes on with help of a friend. It took over 6 hours and although it looks fine at first inspection, parts that needed pulling/stretching gets all wrinkled underneath even with a heatgun. I'm going to take it to a shop to clean it up next week. You're better off spending a little money than wasting a lot of time.

 

[Schulmann]

I have seen some cars where the stripes are narrow in the front (they even touch each other on the bottom of the front bumper) and get larger toward rear bumper.

What is the measure for these stripes ?

 

[1MEANSNAKE]

Yes, I used the Search feature, but it didn't find anything.

I was asked anout the size (width) and spacing of Viper stripes by someone who wants to get the same done on his SRT-4.

Can anyone help me so I can help him?

Thanks in advance.

BTW - I thought they were 8" wide with a 4" space between the two stripes.

You are correct! We are about to do a Yellow SRT-4 with black carbon fiber stripes which should look pretty cool!
If you need a kit, let me know and i can get them out to your friend

 

[SUN RA KAT]

Yes, I used the Search feature, but it didn't find anything.

I was asked anout the size (width) and spacing of Viper stripes by someone who wants to get the same done on his SRT-4.

Can anyone help me so I can help him?

Thanks in advance.

BTW - I thought they were 8" wide with a 4" space between the two stripes.

You are correct! We are about to do a Yellow SRT-4 with black carbon fiber stripes which should look pretty cool!
If you need a kit, let me know and i can get them out to your friend

I copied and pasted your previous posting so he could have your e-mail. He lives fairly close to you, too.

 

[Supercharged Vipermad]

I think the gap varies....honest. I know MINE are NOT stock, and are 4.5" apart. Rick's STOCK 97 B/W has 4 3/8" gap.

 

[IEATVETS]

Screw it, do what I did. Have them painted on you will be much happier with the results. I know I was.

 

[JWVIPER]

A lot of folks like the tape in case they want to change thier minds, but I think most never go back once striped, I have mine painted it is awesome.

 

[VIPR GTS]

Gee, I thought Kenny was going to make that yellow snake look good with some stripes when I saw him post this. Come on Ken, stripe it.

 

[JWVIPER]

Gee, I thought Kenny was going to make that yellow snake look good with some stripes when I saw him post this. Come on Ken, stripe it.

Besides the stripes are good for 5 more HP and 7 RWTQ

 

[SUN RA KAT]

Gee, I thought Kenny was going to make that yellow snake look good with some stripes when I saw him post this. Come on Ken, stripe it.

Hey Tony! Listen to Sweet Sapphire Blues by John Coltrane and you'll hear why only sweet sapphire Vipers can have stripes in the Dayton area.

 

[Fast Viper Dan]

I don't know the numbers, but I have a picture on my wall with 26 Vipers in it. There are two formats.
The following have a wider gap.
Yellow/Black
White/Blue
Silver/Blue
The following have a smaller gap.
Steel Gray/silver
Blue/White
Red/Silver