Starting issue is back...AGAIN!

Disturbed

Viper Owner
Joined
May 20, 2007
Posts
753
Reaction score
0
Location
Orlando, FL
Thanks to Larry Macedo for tring to help me out on the phone.

What happens is the starter just acts as if it doesn't get power, like it's locked out. The car always has power. So it's not a dead battery/low power situation.

I've wired arould the clutch safty swich.

Swaped start relay (ABS light to Start)

Re-set PCM

Dis-arm / arm alarm system


Anytime this happens I can push start the car. And its fine for a few weeks.


After talking to Larry, here is what we came up with for possible issues


Starter Solenoid

Alarm system

Intermintant harness
 

InjectTheVenom

Enthusiast
Joined
Mar 10, 2004
Posts
6,859
Reaction score
0
I have heard many cases like these and it turned out to be the alarm that somehow got into the way of the indeed locked out starter. That's my guess.
 
Last edited:
OP
OP
D

Disturbed

Viper Owner
Joined
May 20, 2007
Posts
753
Reaction score
0
Location
Orlando, FL
I'll be picking up a new starter today. We'll see if that solves it, if it doesn't, I'll be in need of a new alarm system. :mad:
 

RAYSIR

Enthusiast
Joined
Aug 13, 2006
Posts
721
Reaction score
1
Location
Salem, OR
Yep, sounds like bad brushes in the starter to me. Sometimes make contact sometimes not. To confirm power to starter when no crank put a volt meter on the + at the starter and hit the key. That will tell if all the switches and relays work. If no power start back tracking the voltage to where it isn't.
 

ViperVon

Enthusiast
Joined
Feb 22, 2007
Posts
127
Reaction score
0
Location
Motor City
Yep, sounds like bad brushes in the starter to me. Sometimes make contact sometimes not. To confirm power to starter when no crank put a volt meter on the + at the starter and hit the key. That will tell if all the switches and relays work. If no power start back tracking the voltage to where it isn't.

Good advise from RAYSIR. Also look at grounds and ground straps for good clean connections.
 

dansauto

Enthusiast
Joined
Nov 30, 2001
Posts
939
Reaction score
0
Location
gillett, pa, usa
If you can push start it - does that not rule out an alarm issue? I was under the impression that the alarm system cuts the fuel.

bingo! It is not the alarm if you can bump start it, if must be the starter or wiring harness to the starter (sometimes the fuseable links fail also)
 

Latest posts

Forum statistics

Threads
153,644
Posts
1,685,209
Members
18,221
Latest member
tractor1996
Top