Supercharged SRT??

[NOMERCY]

Anyone Supercharge their SRT yet?? If so, details please .... Thanks!!

 

[Jason Heffner]

It is not likely that you will see a supercharged SRT in the near future. The stock crank pulley is too small in diameter to drive a supercharger off of an there is not enough room between the power steering rack and the stock crank pulley to add a 10 rib system. Looks like twin turbos it is! I have done some experimenting with a SRT and so far with minor engine mods I have made 534 rwhp and 525 rwtq. The mods are ported heads, headers, exhaust, and a cam that is very similar to a 97 cam. I'm going to try a couple of other cams soon and think we should see near 600 rwhp with the right combination.

 

[GR8_ASP]

How about the comp coupe cam? I would expect it to be available through Mopar at some point, if not already.

How much were the individual changes? Interested what the exhaust and headers provide alone.

 

[Edward 96GTS]

I suspect that Jason is using the comp coupe cam since it is very similar to the 96/97 cam.

 

[Jason Heffner]

Unfortunately we didn't dyno the Headers & Exhaust alone. Based on what others have seen with their headers & exhaust I wouldn't think that you will see more than 25 to 30 rwhp. I don't know about the comp coupe cam but my guess would be that if you were going to go through the trouble to replace the cam it would be worthwhile to consider something even bigger.

 

[GR8_ASP]

Any change to the valve springs to go along with the camshaft? Maybe going back to a dual spring to add force and damping.

 

[GTS Jeff]

There might be one pretty soon

Click here to read the Doug Levin SRT-10 thread

 

[Jason Heffner]

Yes I did change the valve springs also. There is no need to go to a dual spring nor do I think a set is available. The SRTs have what is called a beehive spring that works well as a single spring. The springs I used won't coil bind until .700" lift and provide more than adequate pressure both open and closed.

 

[NOMERCY]

Thanks for the info.

 

[Bill Pemberton Woodhouse]

Rumor is RSI is doing one also. Jason has some good points , so it will be interesting to see where all these thoughts lead. Haven't heard if Cragin has
done anything, but hopefully we will see alot of performance mods ( big and small ) in the coming months , now that there are a few ******* Serpents
out there.

 

[CajunViper]

TNT Motorsports has one in the works.

Dean

 

[mjguflaw]

I can confirm that one is sitting in DLM's garage under development.