TIME TO UPGRADE EXHAUST ON MY ACR! SUGGESTIONS???

[jpa99acr]

OK, I am ready to give my beast a sound to match! After much investigation here on the boards, I believe I will go with a Belanger... I live in Cleveland TN (30 Miles north of Chattanooga). Are there any good garages in this area that do this sort of thing? Or is it simple enough for a layperson to install? I am a Viper freak, but not the guy who changes the oil in his car...

Thanks!!

 

[Tom Welch]

Hello,

I sent you a private message. Typical install of a complete Belanger Exhaust system should not take more than 6 hours..start to finish. The system installs with ease. If you have access to jack stands and a floor jack and a few simple hand tools, you can do the install yourself. Feel free to contact me should you have any questions.

Thanks and good luck,

Tom

 

[Bandit3]

Jacob,go with the Bellanger setup. I installed the headers and exhaust myself (I own a shop). It wasn;t difficult, but having either a lift orf raising the vehicle a couple of feet will help out. Headers are in three pieces each side. I couldn't use the flex pipe, so I made the rear bracket so as to allow movement and not rattle. My hp increased 63, and torque 51, by exhaust alone with this setup. I have no cats and three inch pipes. John

 

[ryan 94RT]

JAcob,

forget about the exhaust bring it to the track. next panoz track event in feb. sign up and the georgia viper gang will see you at road atlanta. you haven't fun in life until you put your viper on Road Atlanta.

ryan

 

[Dr Roof]

Hey Jacob.

I went to Lee College in Cleveland. Occasionally Im in town next trip down maybe we can hook up.

I have the Corsa exhaust system and it sounds real good.