What are your winter Mod Plans?

[Early93Viper]

What are your winter Mod Plans?

I plan on polishing my wheels, painting my dash, and maybe talking Jerry into helping me install a new clutch so I don't have any suprises next year.

 

[SNKEBIT]

paint job

 

[JohnnyBravo]

I think most of my winter mod plans are getting done as we speak.

I wouldn't mind having my factory wheels chromed, but I think that's about all that's left after Performance by Joe gets done with my car.

Well, maybe a stereo system. But then that's definitely it.

Unless I decide to do some headwork, but then that's REALLY it.

Unless Joe talks me into putting the bottle on the car. But then that's REALLY REALLY it.

Unless.........

 

[plumcrazy]

if i dont sell the car....10lb pulley on a roe,heads,rockers and water/**** along with my nitrous

 

[GTSnake]

A new engine...

 

[V10SpeedLuvr]

Installing my hardtop and driving it all season long
(1 of the few benefits of living in GA)

 

[GR8_ASP]

Damn Tom every time I see that I get a sick feeling in my stomach.

Mods planned:

Install new roll bar
Repaint side sills, side skirts and front splitter
Install new hood pad
reposition all the extra fuel system goodies
Redo A pillar gauge pod and find a place for the O2 gauge
Think of ways to gain more horsepower to keep Tom at bay
Find a way to increase traction.

 

[ViperBite]

Calipers/rotors/pad/SS lines. Complete change of fluids.
New rear speakers. Adjust the drivers door. Maybe a dash pad, glare is bad at times. Research new wheels.

 

[GTSnake]

Damn Tom every time I see that I get a sick feeling in my stomach.

Ron,

I think it's time you go for that twin turbo set up.

 

[IEATVETS]

if i dont sell the car....10lb pulley on a roe,heads,rockers and water/**** along with my nitrous

You must be registered for see images attach

 

[Bo knows]

Porting cylinder heads, port match intake, install headers & nitrous kit. I can't wait for next year !

Bo

 

[Anaconda]

Does "get new tires" count as a mod?

 

[rcdice]

Heavy duty half shafts and 3.33 gears (if they EVER come available) I'm now told (Jon B and Unitrax) that we're looking at February. Every time I ask, the date gets pushed two months back. I guess I'll stop asking.

 

[BlueGTS]

Install Water ****
Install 3M tape behind rear wheels
Install V700's
Chrome Wheels
Cut off exhaust tips and have them re-welded farther from the body
Remove headers and reseal them at the V-band
Possible 10psi pulley (I sometimes hit 9 now at readline)
Possible Roller Rockers

 

[CANTDRIVE55]

Install: rollbar, calipers/rotors/SS hoses, 180 T-stat, P&P'd heads, port match intake, T&D roller rockers, VEC2, +/- intall 3.55 differential.

 

[GotAViper]

Put on the Belanger headers that have been sitting in my garage for months,

Snake Hydes Interior.

 

[Andrew/USPWR]

No mods, just run the piss out of it with the windows down, and the a/c off

 

[Batboy]

Interesting post as I was going to ask opinions on this subject. I'm thinking of powder coating the calipers, manifold and valve covers in blue since nothing on my car is red. Yes, Dodge is synonymous with red but I think the snake will look so much better with blue accents in the engine instead of a color that doesn't even contrast well with my car. And blue is also well known with the GTS. So, do you think this is a big no no? A severe depreciation?

 

[big-n-italian]

vortech supercharger with intercooler

 

[AviP]

My plans are the same as all winters past. Nothing. Stocker!

 

[PSilverGTS]

I will drive when the roads are clear and shovel when it snows.

 

[unreelviper]

If I can't sell my baby(Yes it's for sale!), I will probably just toy with possibly getting a Heffner TT...Will keep you updated!

 

[GTS Bruce]

New roof(on the house) before the snow sets it. GTS Bruce

 

[Mark Hahn]

Hedman Headers with Borla exhaust,probably remove the cats. Possibly Jesel rockers. Maybe a PCM upgrade from West Coast Viper. ? who knows what else. MGH

 

[Viper Specialty]

Engine is coming out as soon as they salt the roads.

Custom rods, Custom pistons, Head job, Custom Valvetrain, Mild cam, Dry-Sump, lightweight flywheel...... and thats just the engine. LOL.

New clutch, Quaife rear end, Half Shafts, Fuel System....

Prolly run that setup for half of next summer, dig myself out of debt while the fresh engine breaks in...

and then SC it with a Half Paxton/Half My own design blower setup- and go back into debt.

 

[carl B]

I am going to do better brkes!!

 

[Viperfreak2]

Remove the secondary cats and have a custom setup made for the exhaust. I'm thinkin butterfly valves so it can run straight out the bottom, or though some bullit mufflers. I want to be able to adjust the sound from the drivers seat.

 

[carguy07]

Interesting post as I was going to ask opinions on this subject. I'm thinking of powder coating the calipers, manifold and valve covers in blue since nothing on my car is red. Yes, Dodge is synonymous with red but I think the snake will look so much better with blue accents in the engine instead of a color that doesn't even contrast well with my car. And blue is also well known with the GTS. So, do you think this is a big no no? A severe depreciation?

I love the blue valve covers and intake, the calipers would look cool too. I would pay a premium for cool powder coated stuff. Get extras and put your originals in a box if it concerns you. I think venom550blue does all of those things.

You must be registered for see images

 

[shelbynut]

It snowing! First snowfall of the year for Toronto area. Better get working on my winter mods...

- Work my a$$ off so I can get one of those nasty blue engines above
- Chrome Gen2 Rims
- Paint Dash
- New Stereo
- Install 3.55 Gears
- Powder Coat Rocker Covers
- Patch holes in trunk lid left from wing removal
- Maybe 1.7 RR's
- Clean Clean Clean!

 

[Stang7900]

Mine is getting a total engine rebuild at Arrow. Car is sitting at Chucks now waiting for its arrival.