will a Gen 2 wheel fit on a gen 3 car
- Thread starter 85 of 200
- Start date
Fast Viper
Enthusiast
yes they will fit, lots of GEN 1 and 2 guys put the 10 spokes on their cars.
unreelviper
Enthusiast
deam, I think that you may have misunderstood his question. I don't think a gen 1 or 2 wheel will fit on a gen 3 car because of the larger brakes and rotors, however, deam is absolutely right when he says that the gen 3 wheels will fit both a gen 1 &2.
speak to Daves Big Brakes he will know, with OE gen2 wheels you need a spacer when fitting gen3 brakes on the front not sure about the rears, the spacer just gives it that extra of clearance needed to miss the calipers
we have a guy here with gen3 discs and calipers all round on his gen2, he also brought the ACR wheels, so maybe the standard wheels wont fit over gen3 calipers on the rear
Boxer12
Enthusiast
The bolt patten is obviously the same, however, the size of the calipers is diffent and Gen2 wheels are 18". Measure the clearance between your caliper and the inside of the wheel. If you are going from a 19" wheel to an 18" wheel, for instance, you will need more than 1/2" clearance for the smaller wheel to fit.
2002_Viper_GTS_ACR
Enthusiast
"Last edited by Red Snake : Today at 02:02 PM. Reason: Correcting info. "
^^^^
This eliminated my previous rant.
NO THEY WILL NOT (gen 2 wheels on a gen 3)
THE ONLY EXCEPTION... If you buy the ARCHER brake relocation kit, you can run AFTER MARKET 18 inch rims with correct offset, you can NOT run any other GEN 2 RIM, OTHER THEN THE ACR on a gen 3 with a brake relocation kit.
Rest assured, I have done and tried all of the above, take my information as fact, or run the risk of getting wheels you cant use.
Jon
^^^^
This eliminated my previous rant.
NO THEY WILL NOT (gen 2 wheels on a gen 3)
THE ONLY EXCEPTION... If you buy the ARCHER brake relocation kit, you can run AFTER MARKET 18 inch rims with correct offset, you can NOT run any other GEN 2 RIM, OTHER THEN THE ACR on a gen 3 with a brake relocation kit.
Rest assured, I have done and tried all of the above, take my information as fact, or run the risk of getting wheels you cant use.
Jon
Last edited:
I have aftermarket rotors, not stock Gen II rotors.
2002_Viper_GTS_ACR
Enthusiast
lol.. No prob Red SNake... you actually dealt with me fairly well. Most people get their ******* in a ***.. u didnt
No worries, and happy 1 year reunion on the forum
Jon
No worries, and happy 1 year reunion on the forum
Jon
Thanks!lol.. No prob Red SNake... you actually dealt with me fairly well. Most people get their ******* in a ***.. u didnt
No worries, and happy 1 year reunion on the forum
Jon
Hope the original poster gets his wheel situation squared away.
Similar threads
