it is only 5-1/4, but you can make 6-1/2 fit. I prefer 6" (less cutting and factory grills fit over top) The speakers in the center are worthless because the enclosure is not any good. Dont spend too much on the center speakers as you still will not get good sound out of it.
If he took this car home and days later this happened, you could have smelled the fresh paint a mile away!!! How long did you car smell after I painted it? If you were looking at a car and smelled fresh paint wouldn't you ask why?
Jamie- white smoke is oil buring, black is a rich condition. There should be a .035 restrictor in the oil feed line to the turbo if the oil feed is coming from the top of the motor. Vipers seem to have high oil presssure. Probably the oil feed is t'd off the sending unit port for your oil...
It is eather heavy primer that was not fully cured when the top coat was applied, or they used a primer that was not comparable with the base and it shrunk. Eather way it now has to be stripped and repainted. That will be a job becuase the primer will be "gummy" The best way to stip this will...
yes probably turbo seals, I dont think he has scavenge pumps. If so that is easay enought to check. I little oil fim is ok, but if you actually have oil pumping out that is not good. You should not run the car eather as oil in the intake will promote detination. You will now need to clean...
Re: BEWARE! I got ripped off by Dan Cole(Dansauto)
my offer is this...I will send him $100 to send them to me. I will then completely stip and refinish for and add'l $500 which he can pay after he receives them back. However, I will not be able to do this for another month as I have others...
Re: BEWARE! I got ripped off by Dan Cole(Dansauto)
I was not to even respond to this thread, but afer reading some comments I feel the need to set the record straight. The orginal quote was $1000 per set to strip and refinish. His sills did not show much corrision so I sent him an email back...
This is a tough call. Some facts need to be pointed out.
Was the property secure (did the police break in or was the gate open) The reason being that if they were suspious of something and broke in you have every right to protect yourself especially if they dont announce who they are. I can...
Re: VenomAero Front Bumper
Laurie's hood is just waiting for paint then to be put on. We are slowly making progess with his car, He is adding lots of extras and that is slowing down things a little. The yellow fascia above is mine and going on my yellow RT10
Re: What\'s involved in a piston swap?
intake manifold and heads have to come off, pan has to come off. Pins off the crank and pull the pistons up thru the top. get new rod bearings and connecting rods too while you are doing it. Diamond pistons are the best value.
Car would have been done a month ago, if we just fixed the damage, but we are adding lots of extras and we continue to wait on parts or have to figure out ways to make the aftermarket stuff work. This car is going to be one of a kind!!
Re: Something about John member 2002 Viper GTS ACR that\'s pretty funny
yep we got a loser here, To actually PM asking for $ is low. It one thing to let everyone know about a shaddy character (even for $50) but then to pm someone for the $50 just because they told you to write it off is pathetic.
It is actaully better to have the one he bought. This upgrades the cooling system with the expansion tank. There is a reason they went this way from 94 up!
I figured out a way for this to work, We will have to tee into the lower rad hose to the bottom of the expansion tank. We will also have to tee that line to the other coolant temp sensor line. Laurie we also have to replace the fan plug as your orginal had the duel fans with two plugs, this...
In PA you have to pay the fine, then plead not guilty and try to win your $ back. Fing joke. it is just a revenue generator, in fact last time I asked the cop if they needed extra funds why didnt they just send a mailer out and save everyone time (I got a ticket for "rolling thu a stop sign")
I sal the ladder on the wall, smart move. I have your PM let me know if you still need the dim (I am sure he has them) how is he anchoring the car? I use full frame truck clamps that way I can still get the ladder under.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.