Search results

  1. R

    Aeromotive pump controller and tach signal

    GreenWorm, I'm not sure you have the correct wire, but the color is correct - GRAY/LIGHT BLUE. Here are some instructions I wrote, for another application, to find the Tach signal wire. 1. The Tachometer signal wire on the Viper can be accessed from 1a) the PCM or from 1b) the Tachometer plug...
  2. R

    Flamethrower exhaust??

    Yep, that's the one: http://www.thehoffmangroup.com/Autol...ts_Flame.lasso GTSnacke; here's your chopped Merc:
  3. R

    Viper Polyurethane Engine Mounts and Transmission Mount

    dave6666,. Question: How do you get within a "Quote" box, the preface, Originally Posted by ________ followed by the text of the quote. Thanks.
  4. R

    Viper Polyurethane Engine Mounts and Transmission Mount

    Dave666, I thought about that, maybe that is why the tranny mounts get destroyed from excessive 'flexing' with stock rubber mounts, causing the engine to lean, un-lean, etc. etc. I am hoping that the use of one shim and the poly mounts, which virtually stops 'flexing' will not strain the...
  5. R

    Viper Polyurethane Engine Mounts and Transmission Mount

    Ooooops, I didn't mean to post that twice - perhaps someone with Forum knowledge can delete one. Sorry - my bad :confused: :confused: :lame:
  6. R

    Viper Polyurethane Engine Mounts and Transmission Mount

    2001GTS, Here you go: It turns out the poly mounts (#2469) are perhaps a fraction of an inch shorter (less thick) than the stock rubber mounts. When installed in my car, I had the same clearance between the header pipes and the frame rail, which was VERY little (feeler gauge clearance)...
  7. R

    Viper Polyurethane Engine Mounts and Transmission Mount

    2001GTS, Here you go: It turns out the poly mounts (#2469) are perhaps a fraction of an inch shorter (less thick) than the stock rubber mounts. When installed in my car, I had the same clearance between the header pipes and the frame rail, which was VERY little (feeler gauge clearance)...
  8. R

    Can coil packs have an intermittent problem?

    viperrt96, Read this post/thread completely, including the solution near the end. http://forums.viperclub.org/showthread.php?t=593276 Car has run great since, including track days. Later,
  9. R

    1" seat lowering kit

    Parts Rack: [email protected], or by phone at (360) 837-3937. http://partsrack.blastmart.com/customer/search.php?substring=seat+lowering
  10. R

    Road racing at Pacific Raceways Aug 4/5

    Yes, I heard (crew radios again) that a corner worker/official had collapsed, but had no idea the seriousness of that episode. Until next time under BETTER conditions. Schedule? Also, come out on July 16th, Alfa Club lapping day - run or not, I plan to run, assuming I can push the clutch -...
  11. R

    Road racing at Pacific Raceways Aug 4/5

    Randy, It was good meeting you and your wife at the races today. Sorry, I could not stick around until after your race, but it took an inordinate amount of time, and I had to leave. From the track position, you must have been ahead of the accident? Have you heard any more details, and of course...
  12. R

    Glowing headers

    Heat shields and/or High Temp (2000 deg.) Ceramic coat the headers. Heat goes out the pipes, not through them. Mine are Gen2 tube headers, and have been coated since 2003.
  13. R

    Not another GEN1 exhaust sound thread!

    Call JonB at Parts Rack. He can fix you up : [email protected], or by phone at (360) 837-3937. http://partsrack.blastmart.com/customer/home.php He can also (probably) fix you up with some super ear plugs for your loud side exhaust - you might need them. Later,
  14. R

    Could someone please post pic of gen 1 viper with stripes?

  15. R

    Coolant Leak - Head or Thermostat

    jgrakla, First, what year is your car, i.e. Gen1 ?? (I don't recall seeing the year - maybe I missed it) Here is what head gasket leaks look like on a Gen 1:
  16. R

    Raptor shiftlight problem

    MacManInfi, WOW, that's a 20% failure rate; would you stand for a 20% tire failure rate or anything else for that matter?? Later,
  17. R

    Any Dash (kits) available for my '94?

    http://www.dashkit.com/classic/products/dodge/viper/1992-96/index.html
  18. R

    how do u know if u have 3.55's??

    The tire/drive shaft rotation is a good way to go. Now if you want to see what different rear end ratios, tire diameters, and transmission gears ratios do relative to MPH and or RPM, use this Gear Calculator...
  19. R

    Emissions Question

    mangle, You said: That is interesting, I did not have those locks on my '96 throttle bodies, but a friend bought a '96 last year and it had those locks. Maybe someone knows if they come on the cars (Gen1, anyway) and people just remove them and leave them off ?? Later,
  20. R

    Mobil 1 10w30 at Walmart 5 quarts for $17.78

    Walmart; $19.94 here in Renton, Washington (Seattle), PLUS we get to pay a whopping 8.9% sales tax, yielding $21.71. Later,
  21. R

    Drifting - FormulaD and MOPAR in Washington

    Here are a few photos from the Drifting at Monroe Speedway - July 21,2007: Club Cars:
  22. R

    question on installing speakers

    Vipertom7, Here is what I did: Yes, remove the back, vinyl panel . I found that in an open car, there was so much noise (wind, engine, tires, etc.) that the high frequencies coming from the door tweeters were really inadequate. You will find, when you get to the rear speakers, some capacitors...
  23. R

    TRACK DAY July 26,2007

    It's time to get in those registration forms for the Track Day on July 26th. Remember to send in or contact: For questions or to register, contact Kathleen Edwards: 253-227-3953 (cell), 253-631-7467 (home), or rapierke(®aol. corn: or Dave Kingstone at 425-823-9031 or...
  24. R

    Fluids Confirmation for my '94 please.

    Are you ready for this: Since I have a 1996 RT/10 - GEN1, I have the Service Manual for the '96 RT/10. I alsohavethe Service Manual for the 1996 GTS GEN2. Here is what the service manuals say (Section 0, page 2 (0-2)) RT/10 - GEN1 -- 10 qts. with filter GTS - GEN2 -- 7.5 qts. with filter (not...
  25. R

    touching up stripes

    Don't really know how long, but I have some on there now for 4-5 years. I really won't come off assuming proper cleaning and keep the area waxed after repair. Later.

Latest posts

Members online

Total: 1,385 (members: 3, guests: 1,382)

Forum statistics

Threads
153,644
Posts
1,685,209
Members
18,220
Latest member
ROIII

Share this page

Top