I have a Chrysler dealership 10 miles away that could supply my viper needs, Do i use them, hell no, for the parts i have needed i go to chuck who's 3000 miles away in another country on another continent, and i still get them quicker.
Chuck, as baz said, you have the Uk support, I'll even...
Had this once and i had it not hold an idle after jump starting also, a short drive didn't fix it, but once you have some charge back in the battery shut it off disconnect and reconnect and it should be fine. Will probably run rough for a bit while it relearns. The funny idle does seem to be a...
is that an MMX3 tire? if so I'm surprised the pin went through it the rubber must be so hard, get some new ones. If its not then move along, nothing to see here.
Try pushing the pipe and filter together which takes the strain off the locking clips. then hold them back and pull the line from the filter. may not work so well if the pipe has been forced on too far but if they are on correct that is the tool free way to get them off.
Is it possible that someone in the past has removed the o-ring and spring in the proportioning valve that separates the two circuits, i seem to recall this was a mod that was discussed a while back to improve rear bias.
wow, Glad your OK. I guess that's the other crappy side of the weak rear breaks. OK so they wont lock up and spin you but with the system split font/back when the front goes you have nothing of any use left.
I guess it could well be slightly rich as I have just replaced the gaskets as the original bellanger ones developed a leak. I guess if they had been leaking a bit for a while before they became noticeable the computer may have increased the fuel to compensate and hasn’t had a chance to settle...
lol
you ll need the wings and and a cold beer after you swim over. at least the water will cool the pipes on the way back.
I was just checking as I've just never seen headers glow on a street car before, but then the viper is kick ass.
Ok so I have just re tightened the header bolts after installing the new gaskets under the bellanger headers and took the car out for a quick spin. Didn’t overly hold back on the throttle so I drove the viper pretty hard. Popped the hood when I got back to check everything was ok and as it is...
It’s the auto form wing. I would disagree with the no drilling part though. You do have to drill 4 holes through the back of the licence plate area into the trunk where you bolt a steel plate with spacers behind the carpet. Although you do have to drill the holes they are at least concealed...
yep its just crazy
$ stronger than the £ = Gas price up
$ weaker than the £ = Gas price up
Global warming = Gas price up
Global cooling = Gas price up
Government puts Gas tax on hold = Gas price up
Government puts up Gas tax = Gas price really up
Spot the trend there?
Gas is about 90p-£1 here at the moment, there is about 4L in a gallon and at an exchange rate of £1 = $2 that's about $8 a gallon
ps Wecome aboard Dave
I’ll take the box in the middle at the bottom and the bottle three rows right two rows in, four rows right and 5 rows in, second from the back on the left hand row and finally that one balanced on the front of the bottom row of boxes
Those look like the fastest bottles. :D
Would it be better to have a repaired tyre of similar age and wear Patten to the other and which is never driven over 90mph (110 max) or have nice shiny new sticky rubber with double the tread depth on one side and old part worn on the other.
I'd have thought the single new tyre would be more...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.