Search results

  1. B

    Looking for pictures of Vipers with Forgeline VR1's ..

    Re: Looking for pictures of Vipers with Forgeline VR1\'s .. Casey, Just wondering what you mean by wasting HP when you go with 19s? Are you talking about weight or gearing ratios or something else?
  2. B

    Viper Center Cap for Purners?

    Vipermed, You have a PM.
  3. B

    Total Weight of Corsa and 19" Purners

    Re: Total Weight of Corsa and 19\" Purners Russ, My car had the factory wheels/tires that came on a 2000 GTS. (Rear: 335/30/18 and Front: 275/35/18) I weighed both sets as a complete wheel/tire with a scale that was good to a 1/2 lb. I talked to the guy from CCW and he said that since the...
  4. B

    Total Weight of Corsa and 19" Purners

    Total Weight of Corsa and 19\" Purners Since I had some time before installing my new wheels/tires and Corsa exhaust with R/T HiFlow Cats, I decided to weigh everything so I could compare it to the factory items. Here is what I can up with: 3" Corsa Stainless Steel Catback Exhaust: 67 lbs...
  5. B

    Viper Center Cap for Purners?

    Does anyone have the Viper stickers for the Purner center caps from JonB? If so, can you please post a closeup picture of them on the car? I want to see them before buying a set for my wheels.
  6. B

    20" StarTech Wheels

    Re: 20 Steve, Partsrack has them listed for $4500 with rubber on their website: http://partsrack.com/ Click on Wheels and Tires. Scroll down to 19" Purners. Click on "Get More Information". You will have to call JonB about shipping (approx. $135) and if you want to go with a bigger tire...
  7. B

    20" StarTech Wheels

    Re: 20 I had a quote for $7500 for the Startechs with shipping. They were too heavy and the cost was more than I wanted to pay for dubs. The 16-Spoke Purners look almost the same and are much lighter/cheaper.
  8. B

    corsa cat back question for those who have it?

    Freddy, Here are a couple of pics of my 3" Corsa setup. I just had them installed this week, so I cannot give you a fair assessment of the dust factor. (The rear bumber was dirty before changing the exhaust and I am still waiting on my latest shipment from Zano) I measured 4" from the...
  9. B

    16-Spoke 19" Purners (Pics)

    Re: 16-Spoke 19 Long Island, I bought them through JonB at PartsRack. He had the best price out of everyone I called, including CCW. I have the Michelin Pilot Sports with 345/30s on the back and 285/30s on the front. I had to specifically ask for the 285s, as JonB normally sells the 275/30s...
  10. B

    16-Spoke 19" Purners (Pics)

    16-Spoke 19\" Purners (Pics) I just figured out how to post images, so I thought I would post a few more pictures of my new Wheels and Tires. The fit and finish of the Purners is excellent and the ride is beautiful. I went with 345s in the back and 285s in the front. I also added 3.55 gears...
  11. B

    20" StarTech Wheels

    Re: 20 Here they are on my car with 345s in the back and 285s in the front:
  12. B

    20" StarTech Wheels

    Re: 20 Bob Kelly Brand Manager [email protected] STARTECH NA 4040 Campus Drive Newport Beach, CA 92660 949.477.2456 ph. 949.797.9177 fx. I bought the new 19" 16-Spoke Purners, instead. They were cheaper and a lot lighter...
  13. B

    Tire choices

    Long Island, I got mine from JonB at Partsrack. He had the best price and he is a huge supporter of the VCA.
  14. B

    Tire choices

    I was told by several of the dealers who sell the 19" Purners that 295/30s will most likely rub in the front and the overall center of gravity will be higher for the car. I would have prefered them over the 285s, but I did not want to have any problems at high speeds or when driving around...
  15. B

    Tire choices

    I just purchased a set of 19" Purners. For the rears, the only choice in Pilots is 345/30s. For the fronts, you can get 275/30s or 285/30s. Everybody I asked said the 295/30s would not work for the front. I went with the 285s, for a slightly taller front tire. Even with the 285s, there is...
  16. B

    613 rwtq on Roe charger without headers,

    Great numbers!!! How does the car run with the 3.55s?
  17. B

    GTS Roof Cracking

    Please post pictures, as I have a 2000 GTS and I would like to see the problem you are describing.
  18. B

    Gear Change $$$ (Complete)

    It sounds like anywhere from $1200 up to as much as $2500, depending on the vendor and what gets replaced. Is there any reason/advantage in changing the whole differential? I have a low mileage car and I was planning to just swap the gear to keep more of it original.
  19. B

    Good Viper Tech in NW Houston

    AJT, I live in Tomball. I will give NW Dodge a call and ask to talk with Hector. I will also call Samuels Dodge. Thanks
  20. B

    Gear Change $$$ (Complete)

    I am considering a gear change to 3.55 or 3.45 and I have read a lot of threads concerning the benefits of each, but I could not find any reference to total price. Now, I am looking for an estimated price range for the complete job. (Parts and Labor) I would appeciate any feed back from those...
  21. B

    Good Viper Tech in NW Houston

    I am looking for a recommendation of a good Viper Tech in NW Houston. I was using Carlos Smith at NW Dodge, but he no longer works there and I have not been able to locate his new place of employment. Any recommendations in the Houston area would be considered.
  22. B

    Speedometer Calibration

    Gadgetmann, Do not mean to hijack your thread, but why 3.45s instead of 3.55s? Are you planning more upgrades in the near future?
  23. B

    'Interesting' Viper on eBay

    Re: \'Interesting\' Viper on eBay I do not like the paint either, but I am partial to all black. I am also wondering why their are no pictures of the "checkered flag" side of the car????
  24. B

    Hi-Flow Cats w/ Corsa

    I wanted to thank everyone for their help. I placed my order with JonB today and I went with the Smooth Tubes, K&N Filters, Corsa and R/T Hi-Flow Cats. I also added the new 16-Spoke 19" Purners from the "great looks" department. :cool...
  25. B

    Car Covers?

    I like the OEM cover because it has the name and snake logo embroidered on the front. It keeps me from having to show people what is really under it...

Latest posts

Members online

Total: 1,176 (members: 7, guests: 1,169)

Forum statistics

Threads
153,647
Posts
1,685,250
Members
18,224
Latest member
dave777

Share this page

Top