Arrow rocker arms?

[MaxedGTS]

Has anybody had experience with the Arrow roller rockers? i'm thinking about installing them on my sc car. How much horsepower will they hold up to safely?
i want the t&d but they seem to pricey and figure the Arrows would be ok for the right price.

thanks Max

 

[Jack B]

Buy cheap on cosmetics, don't buy cheap on reciprocating parts.

 

[HOdbleFman]

I bought the Harland Sharp from Roe Racing earlier this year. The Arrows are made by Harland Sharp and they are the one's that invented the roller rocker. I believe they are good rockers. I know the earlier one's had some issues, but they were taken care of recently. I wouldn't say HP would have as much to do with it as much as how much time you spend at high rpm's or if you went to a more aggresive cam. I guess if you are going to run your car hard all the time go ahead and get the T&D's. For the street and a little racing my thoughts are that they'd be ok.

 

[MaxedGTS]

I bought the Harland Sharp from Roe Racing earlier this year. The Arrows are made by Harland Sharp and they are the one's that invented the roller rocker. I believe they are good rockers. I know the earlier one's had some issues, but they were taken care of recently. I wouldn't say HP would have as much to do with it as much as how much time you spend at high rpm's or if you went to a more aggresive cam. I guess if you are going to run your car hard all the time go ahead and get the T&D's. For the street and a little racing my thoughts are that they'd be ok.

thank you that is the answer i was looking for.i have a stock cam and will think about using them.

Max

 

[HOdbleFman]

Get some other opinions before you make your decision. Those are just my thoughts. Talk to Doug Levin about them; I'm sure he'd steer you in the right direction. Jack B knows his stuff. Not to hijack your thread, but...Jack, I met you at the Summit Racing store last month in the parking lot. I don't know if you remember it or not, but I had left my car at home due to some bad plug wires. Just thought I'd say hey.

 

[99 R/T 10]

I have a set of Moper RR in the classifieds if your interested.

 

[1TONY1]

I have Arrows on my car. Are you sure your DLM car has stock rockers ???????

 

[Larry Macedo]

The only cheap aspect of those rocker arms would be the price. Ward Reasoner (Cudaman) has been utilizing the Harland/Sharp rocker arms for well over a year with zero defects or malfunctions. If anyone knows Ward, he drives his Viper HARD and the only problems to date are transmission, half shaft and differential malfunctions.

 

[MoparMan]

How much of gain (if any) would there be from putting the roller rockers on an otherwise stock engine? There should be some gain from the altered lift ratio, right?

 

[Sam 01 RT10]

Part timer! From what I've read, most get anywhere from 12-17hp from them.

They still won't save you.

 

[MoparMan]

Save me from what? I didn't exactly see your car pulling away on the 15, but I did notice it in my rear view mirror a time or two.

 

[Tom Welch]

I have used and installed the Arrow Rockers. They work great and are easy on the installer. I highly recommend them.

On a side note, concerning early problems with the Arrow adjuster screw, the good news is that Arrow took care of the customer and went so far as to repair-replace the entire engine if needed. Ask the other rocker manufacturers what their guarantee is.

You won't be disappointed with the Arrows, Max.

Good luck,

Tom

 

[Sam 01 RT10]

Save me from what? I didn't exactly see your car pulling away on the 15, but I did notice it in my rear view mirror a time or two.

Your memory must be fading, old timer....Need I remind you of Summerlin Parkway?

I think roller rockers may be my next thing, how much do the Arrows/Harland Sharp ones go for?

 

[MoparMan]

Save me from what? I didn't exactly see your car pulling away on the 15, but I did notice it in my rear view mirror a time or two.

Your memory must be fading, old timer....Need I remind you of Summerlin Parkway?

I think roller rockers may be my next thing, how much do the Arrows/Harland Sharp ones go for?

Aw, hell, I was just letting you feel good about yourself. I still don't remember you pulling away last Sunday...

 

[Chuck B 98 GTS]

I have Arrows on my car. Are you sure your DLM car has stock rockers ???????

1TONY1, I don't think the DLM level I's come with roller rockers.

Cheers,
Chuck

 

[vegasviper]

I have Arrows and drive my car very very hard in Vegas heat at high RPMs all day long, not one problem.

 

[Bad_Byte]

I have a set of arrows for sale or trade (make me a deal) if any one is interested.

You must be registered for see images

 

[HOdbleFman]

I have 20,000 HP and a cam with 2" of lift. That's right 2" and I drive my car at 10,000 rpm 3 to 4 hours a day. The arrows are holding up great.