help with oil cooler lines

[96fl]

Hello
I am seeking an oil cooler line for a 1996 GTS
there are 2 of course, the one with the larger 90 degree turn part#4848310 i recieved from Tators Garage (Chuck is extremly helpful)
What i can't locate is the line with the tight 90 degree turn part #4848300 is unavailable
Is there any one out there with one available or knows where to get one
I have checked with Parts Rack and a fellow named Paul Sharf i think out of wisconsin
I am in a bind and need to move my viper in the next week
please help if you can Bill

 

[Steve-Indy]

Take your old line to Earl's or similar shop...and have new one made. I have done this for a friend in a similar situation...worked well.

Good luck!!

 

[96fl]

had a set made by a hydraulic shop here in jacksonville
they had a very difficult time finding the fittings
what they did come up with was 1 1/16 hex wich wouldn't fit thru the opening
after i put them on a surface grinder and turned it into a 1 hex i was able to see that the 90 degree bend was two large
thanks for your reply i will have to try another place

 

[VIPER BAZ UK]

They were hard to get and expensive a few years ago when i tried. Even Chuck T stuggled as they were on back order from DC..... Got a set made up from a company called Pirtek here in the UK....

 

[MTGTS]

There was a set on ebay a week ago, also try calling Paul Sharf

 

[96fl]

thanks for the replies
paul sharf told me that most of the vipers he dismantles
are front end wrecks and that these hoses don't survive
also that he sells every set he gets

 

[MTGTS]

thanks for the replies
paul sharf told me that most of the vipers he dismantles
are front end wrecks and that these hoses don't survive
also that he sells every set he gets

He's got a set listed on ebay
Dodge Viper Gen 2 Stock Oil Lines Used Pair - eBay (item 380238984021 end time Dec-28-10 11:04:02 PST)

and I'm not sure if this is the single you need
Dodge Viper Single Oil Cooler Line Gen 2 Used - eBay (item 360148603596 end time Dec-11-10 08:20:55 PST)

 

[96fl]

thanks for the links and your efforts
i will recontact him tomorrow