Parking Brake

TalonTSi90

Enthusiast
Joined
Jun 29, 2016
Posts
612
Reaction score
0
It has only ever locked the rear wheels on any car ever made with one. Unless you have an AWD car, then all 4 will be locked (more or less).
 

DrumrBoy

Enthusiast
Joined
Jul 21, 2003
Posts
2,612
Reaction score
0
Location
GA
I have never looked at the workings of the cable from under the car....sometimes when the lever is pulled up I can tell the cable has slipped off something....it doesn't tighten up. Pull it a few times and it "catches". Its annoying but not the end of the world. Is the fix easy or difficult? It seems like it might just be a matter of getting the cable running in the right pulley or something.
 

TalonTSi90

Enthusiast
Joined
Jun 29, 2016
Posts
612
Reaction score
0
I have never looked at the workings of the cable from under the car....sometimes when the lever is pulled up I can tell the cable has slipped off something....it doesn't tighten up. Pull it a few times and it "catches". Its annoying but not the end of the world. Is the fix easy or difficult? It seems like it might just be a matter of getting the cable running in the right pulley or something.

There's a tab or something that would hold the end of the cable housing that provides resistance against the caliper end so the cable will actuate the caliper and clamp the rotor. Im better the cable has stretched just enough that it falls out of the tab/bracket/socket and makes it loose till you force it to catch.

Note, im saying this from general knowledge, not actual Viper knowledge, so im trying to be general.
 

DrumrBoy

Enthusiast
Joined
Jul 21, 2003
Posts
2,612
Reaction score
0
Location
GA
Thanks Talon, next time its on the lift I'll check that out.
 

Latest posts

Members online

Forum statistics

Threads
153,644
Posts
1,685,209
Members
18,220
Latest member
ROIII
Top