What is the name and/or part# for this Viper Part and how much does it cost?

[costanZo]

For some reason, I realized I am missing one of these rubber strips over the wheel when I lifted the hood of the car.... I figured, if it was a cheap piece to buy one so that the driver's side isn't missing one anymore.

****I have attached 2 pictures that show the rubber piece on the passenger side, and no rubber piece on the drivers side.

 

[cfiiman]

Jon B at parts rack or Chuck Tator can help you (just thought i'd post what others are going too )

 

[costanZo]

Jon B at parts rack or Chuck Tator can help you (just thought i'd post what others are going too )

Thanks lol, I already planned on contacting them about it. However, it's kinda too late to right now and it's been bugging me. So I figured I'd see if anyone knew at the moment.

 

[Viper Parts of America]

It is probably the "front splash to hood weatherstrip" and is Mopar part #4709030AB. MSRP on that part is $44.45 - and no, that is not a quote from us but simply letting you know how Mopar prices them.

 

[RT/ED]

These rubber strips tend to come loose, normal issue. When you get your replacement, put a bead of clear silicone rubber caulk inside the groove and press back on, do the other side as well......problem solved.

 

[costanZo]

It is probably the "front splash to hood weatherstrip" and is Mopar part #4709030AB. MSRP on that part is $44.45 - and no, that is not a quote from us but simply letting you know how Mopar prices them.

These rubber strips tend to come loose, normal issue. When you get your replacement, put a bead of clear silicone rubber caulk inside the groove and press back on, do the other side as well......problem solved.

Thank you both very much! It's also nice to know the part is only around $50 at most. I was hoping it wasn't gonna be a $100 part or something.

 

[Vipuronr]

For that price, you should do both sides!

 

[DrumrBoy]

I know there's one on the outside of T12 at Road Atlanta....may have been run over a few times but probably still OK. Thanks for posting, it reminds me that I too have to go get a couple of them.

 

[costanZo]

I know there's one on the outside of T12 at Road Atlanta....may have been run over a few times but probably still OK. Thanks for posting, it reminds me that I too have to go get a couple of them.

Time for a GROUP BUY!

For that price, you should do both sides!

Not a bad idea lol, but the one that is already on my car seems to be in good condition. So I'd rather put that $50 towards something else.

 

[got one]

It is probably the "front splash to hood weatherstrip" and is Mopar part #4709030AB. MSRP on that part is $44.45 - and no, that is not a quote from us but simply letting you know how Mopar prices them.

I'll take one for my 94 passenger side!!!

 

[NSviper]

These rubber strips tend to come loose, normal issue. When you get your replacement, put a bead of clear silicone rubber caulk inside the groove and press back on, do the other side as well......problem solved.

Good idea thanks.

 

[Viper Parts of America]

I'll take one for my 94 passenger side!!!

Check your PM's...

 

[Timnineside]

Glue that **** on as soon as you get it! I had one or two come up missing on my old RT.