"LIVE AUCTION" - APRIL 27th, 2013 - 9PM EST - ULTIMATE VIPER PARTY

OP
OP
daytonprowler

daytonprowler

Enthusiast
Joined
Nov 4, 2003
Posts
2,305
Reaction score
0
Location
Dayton, Ohio
What about shipping ? Do we have to guess or shipping charge will be indicated ?

Shipping costs and or arrangements are the responsibility of the winning bidder.

Large items like the Corsa Exhaust, Pirelli Tires, Bad Boyzz Heritage Clutch, Viper Office Chair, etc. will be shipped directly from the manufacturer to the winning bidder.

Other large items like the JD Barrel, Viper Themed Gas Pumps ( yes we will have one in Stryker Red and a B/W Launch Edition), etc. those can be shipped, but historically with this auction people have made arrangements to pick them up. For instance, last years gas pumps went to Texas and New York. The winning bidder made their own arrangements to have them picked up. We will help you. We want this to be a great experience for everyone.


The auction list is not complete. You ain't seen nothing yet! Check back often as we will be adding more GREAT Viper items up until April 27th, 2013!
 
OP
OP
daytonprowler

daytonprowler

Enthusiast
Joined
Nov 4, 2003
Posts
2,305
Reaction score
0
Location
Dayton, Ohio

9. A set of racing tires for your Viper from our friends at Hoosier!

You must be registered for see images attach
 

Kevan

Enthusiast
Joined
Dec 11, 2006
Posts
2,556
Reaction score
1
Location
New Albany, OH
I heard today that a ******** Viper guy is driving 10 straight hours just for this event!
At the same time, I heard that a guy with a Yellow viper (who's MUCH closer) isn't driving to this event.

I guess what they say is true.......
:D :D :D
 
OP
OP
daytonprowler

daytonprowler

Enthusiast
Joined
Nov 4, 2003
Posts
2,305
Reaction score
0
Location
Dayton, Ohio
10. Custom Viper Luggage
From the #1 Viper Upholstery Vendor
Venzano Interiors!

The piece of luggage that will be custom made by Tony (Venzano Interiors) for the auction will be
BLACK leather with the National VCA Stryker logo in RED.


We will post a picture of the actual luggage as soon as Tony is done handcrafting it. :)

Below is an EXAMPLE of luggage made by Tony (Venzano Interiors) for VCA Auctioneer Tom Paranzino.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


 

Mopar Boy

Enthusiast
Joined
Nov 2, 2007
Posts
10,274
Reaction score
0
Location
Ontario and Ohio
I heard today that a ******** Viper guy is driving 10 straight hours just for this event!
At the same time, I heard that a guy with a Yellow viper (who's MUCH closer) isn't driving to this event.

I guess what they say is true.......
:D :D :D

Less emphasis on "much". :rolaugh: Said person beats me only by an hour. And I have seen him drive. He likely can make the trip from NC in 8. ;)
 
OP
OP
daytonprowler

daytonprowler

Enthusiast
Joined
Nov 4, 2003
Posts
2,305
Reaction score
0
Location
Dayton, Ohio
Well........ looks like I might have a couple more things up my sleeve.

Maybe a Stryker Red Viper traffic light........ Blue/White Launch Edition Viper themed gas pump...... and a Stryker Red Viper themed gas pump. How does that sound?

All are in primer and should be painted by the end of this week! I will post pics as soon as they are done. Oh, each has some carbon fiber accents. It's all in how you accessorize.
:D

Also, waiting on a couple more vendors to decide what they are donating.

 
OP
OP
daytonprowler

daytonprowler

Enthusiast
Joined
Nov 4, 2003
Posts
2,305
Reaction score
0
Location
Dayton, Ohio
CORRECTION!! :)
10. Custom Viper Luggage
From the #1 Viper Upholstery Vendor
Venzano Interiors!


The piece of luggage that will be custom made by Tony (Venzano Interiors) for the auction
will be
BLACK leather but there is some exciting news.

The winning bidder will have his/her choices in the following:

1. accent leather color
2. Sneaky Pete, Fangs, or Stryker logo and color
3. Name or Personalization

Winning bidder will receive their one off - custom made luggage
in 3-4 weeks after auction!


This is handcrafted and takes roughly 17 hours to make!


Below is an EXAMPLE of luggage made by Tony (Venzano Interiors) for VCA Auctioneer Tom Paranzino.
EXAMPLE:
1. Accent leather color - Cognac
2. Logo - Sneaky Pete - Cognac
3. Name - Tom Paranzino

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

01sapphirebob

Enthusiast
Joined
Apr 21, 2008
Posts
4,962
Reaction score
0
Location
"OIHO"
CORRECTION!! :)
10. Custom Viper Luggage
From the #1 Viper Upholstery Vendor
Venzano Interiors!


The piece of luggage that will be custom made by Tony (Venzano Interiors) for the auction
will be
BLACK leather but there is some exciting news.

The winning bidder will have his/her choices in the following:

1. accent leather color
2. Sneaky Pete, Fangs, or Stryker logo and color
3. Name or Personalization

Winning bidder will receive their one off - custom made luggage
in 3-4 weeks after auction!


This is handcrafted and takes roughly 17 hours to make!


Below is an EXAMPLE of luggage made by Tony (Venzano Interiors) for VCA Auctioneer Tom Paranzino.
EXAMPLE:
1. Accent leather color - Cognac
2. Logo - Sneaky Pete - Cognac
3. Name - Tom Paranzino

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach

Oh man!!!!!!!
 

Mopar Boy

Enthusiast
Joined
Nov 2, 2007
Posts
10,274
Reaction score
0
Location
Ontario and Ohio
Oh man is right! I know Tony could make some sweet yellow luggage as yellow is in his blood!!! :D

(BTW Tony, if you ever read this, don't think your yellow shoes will be safe at any events this year.....I have been working on an evil plan. :devgrin:


:rolaugh:
 
OP
OP
daytonprowler

daytonprowler

Enthusiast
Joined
Nov 4, 2003
Posts
2,305
Reaction score
0
Location
Dayton, Ohio
Well........ looks like I might have a couple more things up my sleeve.

Maybe a Stryker Red Viper traffic light........ Blue/White Launch Edition Viper themed gas pump...... and a Stryker Red Viper themed gas pump. How does that sound?

All are in primer and should be painted by the end of this week! I will post pics as soon as they are done. Oh, each has some carbon fiber accents. It's all in how you accessorize.
:D

Also, waiting on a couple more vendors to decide what they are donating.


UPDATE: Pictures of the Viper traffic light and Viper themed gas pumps will be posted by the end of next week. :)
 
OP
OP
daytonprowler

daytonprowler

Enthusiast
Joined
Nov 4, 2003
Posts
2,305
Reaction score
0
Location
Dayton, Ohio
11. OEM Dodge Viper 10 Spoke Wheels

This is a full set of four OEM Dodge Viper 10-Spoke Wheels (WPH) that came to us straight from the Conner Avenue Assembly Plant. They arrived in slightly used condition (probably off a pilot car) and we wanted them to be as close to new condition as possible. So we sent them to one of the best alloy refinishing shops in the country where they were cleaned, measured for radial and lateral run-out, stripped, and inspected for any
structural problems (there were none).

They then repaired any scratches, dings, or curb rash present on the wheel to provide a factory-smooth finish all the way around. Finally, they polished them to a brilliant shine and did something that we requested and that was to NOT apply a clear coat. Why? Because if you have ever seen the high-grade aluminum of a Viper wheel polished without the duller clearcoat applied you will be amazed. Shining like brilliant chrome, these will blow all the other Viper owners away when they see them. They will take a little more care (no abrasive cleaners), but that is about it.
You will be VERY pleased with this set.

While they aren't brand new and perfect, they look fantastic inside and out.

Mopar Part # TW89XZAAA (rear)
Mopar Part # TW85XZAAA (front)

You must be registered for see images attach




 
Last edited:
OP
OP
daytonprowler

daytonprowler

Enthusiast
Joined
Nov 4, 2003
Posts
2,305
Reaction score
0
Location
Dayton, Ohio
11. OEM Dodge Viper 10 Spoke Wheels

This is a full set of four OEM Dodge Viper 10-Spoke Wheels (WPH) that came to us straight from the Conner Avenue Assembly Plant. They arrived in slightly used condition (probably off a pilot car) and we wanted them to be as close to new condition as possible. So we sent them to one of the best alloy refinishing shops in the country where they were cleaned, measured for radial and lateral run-out, stripped, and inspected for any
structural problems (there were none).

They then repaired any scratches, dings, or curb rash present on the wheel to provide a factory-smooth finish all the way around. Finally, they polished them to a brilliant shine and did something that we requested and that was to NOT apply a clear coat. Why? Because if you have ever seen the high-grade aluminum of a Viper wheel polished without the duller clearcoat applied you will be amazed. Shining like brilliant chrome, these will blow all the other Viper owners away when they see them. They will take a little more care (no abrasive cleaners), but that is about it.
You will be VERY pleased with this set.

While they aren't brand new and perfect, they look fantastic inside and out.

Mopar Part # TW89XZAAA (rear)
Mopar Part # TW85XZAAA (front)

You must be registered for see images attach




Proceeds from the sale of these wheels will be donated
to the
Viper Club of America!
:usa::2tu:
 
OP
OP
daytonprowler

daytonprowler

Enthusiast
Joined
Nov 4, 2003
Posts
2,305
Reaction score
0
Location
Dayton, Ohio
12. SCT Flash Programmer
('96-'06)
From our friend and newest sponsor Dan Lesser
You must be registered for see images attach



SCT Flash Programmer
[Years: 96-06]


You must be registered for see images attach

Finally, the Viper & Ram SRT-10 owners have a means of flash-programming their Powertrain Control Modules to make changes in the way the engine systems operate or to correctly control aftermarket engine modifications without the need for piggyback or inline controllers, or going to a replacement controller. The capability of the factory PCM is greater than expected, and as of now, can finally be programmed by the end user easily and without so much as removing a single screw.The flash programmers (XCal2) can hold a total of 3 tunes plus the stock tune. The end user can switch between these tunes any time they would like by plugging the controller into the OBD-2 port under the driver side dash. An SCT/DCX authorized dealer such as VSP can edit these tunes at any time if the car is upgraded again, and now that the LiveLoad software has been released, these tunes can simply be e-mailed to and uploaded by the customer at home. The flash programmer will VIN lock to your car once it is used, although the programmer can be unlocked and moved to a different car for a fee if you happen to sell or change vehicles. The XCal2 can also read and erase DTC's to extinguish the check engine light and diagnose faults.

The purchase price includes 1 XCal2, and up to 3 basic tunes. Additional basic tunes can be added later, but are not required during the initial purchase and can be added at any later date for 49.00 each. VSP will work with the customer to determine what parameters will be changed, such as injector scaling, fan temps, spark and fuel maps, decel fuel modes, etc. YOU chose your parameters, or you can have us choose them for you. There is no hidden fee for custom tunes, each and every customer has the option to specify what they want in their tunes. Please contact VSP if you have any questions on what can be edited on your program. Large scale custom tuning also available for extremely modified engines, this is charged by the hour for writing tunes.

Future software updates will also yield new parameters and options that the dealer can list as customer-adjustable. The XCal2 will also serve as a logging device once the LiveLink Software becomes available. The current Xcal2 will be compatible with these future updates, and they are right around the corner. VSP has been helping SCT create new parameters and unlock the PCM to its full potential as quickly as possible.

Select your Processor Code, this is the part number found on your PCM. If your code is not listed, please contact VSP, it just needs to be added. The PCMs of 1996-2002 cars are located under a cover on the Driver side in front of the door hinge secured to the toe box, and the PCMs on 2003-2006 cars are located on the Driver side inner fender, right behind the upper radiator hose and to the rear of the headlight. Also select the number of tunes you wish to start with, additional tunes can be added later.




 

01sapphirebob

Enthusiast
Joined
Apr 21, 2008
Posts
4,962
Reaction score
0
Location
"OIHO"
12. SCT Flash Programmer
('96-'06)
From our friend and newest sponsor Dan Lesser
You must be registered for see images attach



SCT Flash Programmer
[Years: 96-06]


You must be registered for see images attach

Finally, the Viper & Ram SRT-10 owners have a means of flash-programming their Powertrain Control Modules to make changes in the way the engine systems operate or to correctly control aftermarket engine modifications without the need for piggyback or inline controllers, or going to a replacement controller. The capability of the factory PCM is greater than expected, and as of now, can finally be programmed by the end user easily and without so much as removing a single screw.The flash programmers (XCal2) can hold a total of 3 tunes plus the stock tune. The end user can switch between these tunes any time they would like by plugging the controller into the OBD-2 port under the driver side dash. An SCT/DCX authorized dealer such as VSP can edit these tunes at any time if the car is upgraded again, and now that the LiveLoad software has been released, these tunes can simply be e-mailed to and uploaded by the customer at home. The flash programmer will VIN lock to your car once it is used, although the programmer can be unlocked and moved to a different car for a fee if you happen to sell or change vehicles. The XCal2 can also read and erase DTC's to extinguish the check engine light and diagnose faults.

The purchase price includes 1 XCal2, and up to 3 basic tunes. Additional basic tunes can be added later, but are not required during the initial purchase and can be added at any later date for 49.00 each. VSP will work with the customer to determine what parameters will be changed, such as injector scaling, fan temps, spark and fuel maps, decel fuel modes, etc. YOU chose your parameters, or you can have us choose them for you. There is no hidden fee for custom tunes, each and every customer has the option to specify what they want in their tunes. Please contact VSP if you have any questions on what can be edited on your program. Large scale custom tuning also available for extremely modified engines, this is charged by the hour for writing tunes.

Future software updates will also yield new parameters and options that the dealer can list as customer-adjustable. The XCal2 will also serve as a logging device once the LiveLink Software becomes available. The current Xcal2 will be compatible with these future updates, and they are right around the corner. VSP has been helping SCT create new parameters and unlock the PCM to its full potential as quickly as possible.

Select your Processor Code, this is the part number found on your PCM. If your code is not listed, please contact VSP, it just needs to be added. The PCMs of 1996-2002 cars are located under a cover on the Driver side in front of the door hinge secured to the toe box, and the PCMs on 2003-2006 cars are located on the Driver side inner fender, right behind the upper radiator hose and to the rear of the headlight. Also select the number of tunes you wish to start with, additional tunes can be added later.








Thats awesome!!! Thanks Viper Specialty.
 
Top